SAS - S.A.S. INDUCTION CHANNEL FURNACES.

Cold face insulation

Ceramic fibre containing cartons - supplied in 3 to 10 mm thickness ceramic fiber free cartons.

_Name	_Composition			Max. Working	Base	Placement
	_Al2O3	_SiO2	MgO	Temp. %

Light weight insulating concretes (Side walls - cover)
JETMIX 004	44	50		1.400°C	Chamotte	Gunned-Cast
JETMIX 005	49	40		1.500°C	Chamotte	Gunned-Cast

Dense Hot face Refractory castables.
JETMIX 300	60	27		1.550°C	Mullite	Gunned-Cast
ALUMIX 80	90.5	-		1.700°C	Tabular Alumina	Cast

Upper case and siphons
JETMIX 602	93	1		1.900°C	Tabular Alumina	Gunned-Cast
JETMIX 603	91	1		1.900°C	Tabular A.Cr2O3	Gunned-Cast
JETMIX 605	95.4	0.1		1.800°C	Tabular Alumina Spinels	Cast

JETMIX 580 SR	87.6	7.9		1.700°C	Bauxite-ULCC	Cast

FLOWMIX 601	93.7	0		1.800°C	Tabular Alumina LCC	Self flow

Inductors
INSEMAG SP	12	2	2.3	1.700°C	CFused Alum./ Magnesia	Dry Vibrated

1/ FURNACE COMMISSIONNING.

S.A.S. takes care of drying, firing and full commissionning of furnaces linings, using its own hot air generators, air-oxygen burners and temperature recording during the whole heat treatment, previously decided upon in accordance with the customer's requirements.

This heat treatment has a considerable bearing on the lining life time and furnace operation.

S.A.S. specialists prepare the inductor and furnace assembly surfaces and supervise the inductor or inductors jointing.

2/ FURNACE OPERATION.

S.A.S. record all temperature and operationnel data supplied by the customer according to an agreed schedule in order to inform of the furnace lining evolution in time.

3/ MAINTENANCE.

S.A.S. informs the customer as to the recommended time for an inductor change which will be effected under its supervision. Spare inductors will have been made ready by S.A.S. specialists.

For more information, send us an e-mail.